-
Master Cylinder Tank, Plastic
2 × $44.00 -
Cylinder Head Stud, Short
3 × $13.00 -
Fuel Injector Remover - for JLR
2 × $225.23 -
OIL COOLER, ENGINE
1 × $214.83 -
By-pass Hose Adaptor, Long
3 × $22.00 -
Fuel Bowl Float Suit 1-1/4", 1-1/2" & 1-3/4" SU
2 × $62.15 -
BRAKE FLUID TESTER
1 × $55.00 -
Adjustable Height Suspension Kit
2 × $286.72 -
Carburettor Throttle Disc Screw
2 × $2.31 -
SWITCH, WASH/WIPER (LUCAS)
2 × $40.43 -
ABS SENSOR, REAR - DISCOVERY 2
2 × $55.12 -
Bolt, Crown Wheel To Hemisphere Housing 2/Hand
1 × $1.50 -
Heater Tap
2 × $44.00 -
HT Lead Ignition Spark Tester
1 × $49.50 -
BOLT, PROPSHAFT UNIVERSAL JOINT
2 × $1.27 -
Headlamp, 7" Sealed Beam
2 × $16.50 -
Blanking Plate, Heater Tap Outlet
1 × $12.10 -
Sheer Nut, Steering Column Clamp
1 × $4.40 -
Wheel Cylinder Assembly Left Hand Bore
1 × $30.80 -
Mirror Glass, RH Convex
1 × $59.68 -
FILTER - AIR V12 upto '88 MANN
2 × $46.20 -
Accelerator Cable, Long Nylon Sleeved
1 × $19.25
Shop
-
-
$34.65
Accelerator Cable, Rover Mini Single Point Injection
Suits Mini 1990 on with the 1275cc engine.
-
-
-
-
$36.25
Accelerator Pedal, Wider Type
This type of pedal was fitted to the Rover Mini and can be fitted to any Australian Mini
-
$53.35
Valve block & seals for brake accumulator.
Suit Jaguar XJ40 up to 594575
Genuine Jaguar New Old Stock
-
-
$1,798.50
The acoustic mat system has been designed to drastically reduce noise entering the cabin of your Land Rover. Made from cast dense polyurethane, the mat is built to industrial standards for reducing noise levels often found in construction equipment. It provides a hard wearing, durable surface that can withstand constant daily use and is easy to clean. A custom fit mat drastically reduces noise entering the cabin and panel reverberation.
[envira-gallery id="91428"]PLEASE EMAIL TO PRE-ORDER – CONTACT BMI
-
-
-
-
$7.92
Adaptor Between Carburettor & Air Cleaner, 1 1/4″ SU. This is a 2nd Hand part in good condition.
-
$16.78
Adaptor Fuel Bowl To Carby  L/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about 1 o’clock position.
-
$16.78
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about ’11 o’clock position.