-
THERMOSTAT & WATER HOUSING
1 × $95.48 -
Valve Cotter, Pair
2 × $9.90 -
Shake Proof Washer, Steering Wheel To Column
1 × $0.33 -
THERMOSTAT 4.4L V8
1 × $48.13 -
INTERCOOLER SILICONE HOSE KIT TDV6 2.7L
1 × $143.00 -
Brake Fail Switch
1 × $79.75 -
Thermostat Housing Stud 48mm (1.9375") Long
1 × $2.82 -
Diesel Injector Extractor - for JLR 2.7, 3.6 engines
1 × $217.25 -
FRONT ARM, 3 DEG 44mm CASTER CORRECTED, H/D
2 × $495.83 -
Wheel Nut, Rostyle
1 × $4.68 -
STARTER MOTOR - D3/RRS AJV8
1 × $340.56 -
Nut, 3/16'' UNF, Multi Use
1 × $0.39 -
Rocker Arm / Tappet
1 × $38.50 -
Wheel Nut, Rostyle Wheels, Mini ''S'' 2/H
1 × $2.20 -
MIRROR ARM, EXTRA LONG
1 × $83.33 -
Adjustable Brake Caliper Rewind Tool Kit
2 × $105.33 -
GREASEABLE BALL JOINT, A FRAME
3 × $41.42 -
Bolt, Front Sub Frame Tower to Body, (Dry)
2 × $13.20 -
AIR FILTER, D4/D5/RANGE ROVER
2 × $19.64 -
Rotor Arm, Suit Ducellier Distributor
1 × $5.50 -
Master Cylinder Tank, Plastic
2 × $44.00 -
Motor & Pump, Windscreen Washer
2 × $42.63 -
HT Lead Ignition Spark Tester
1 × $49.50 -
A/C CONDENSER w/DRYER - D4/RRS
2 × $262.96 -
PUMP - OIL
1 × $210.93 -
HEADLAMP RETAINING RIM, INNER 7"
2 × $22.83 -
Exhaust Clamp, Manifold to Engine Pipe Quick fit
2 × $11.83 -
Fuel Injector Remover - for JLR
2 × $225.23 -
WEAR SENSOR, FRONT BRAKES, RR, RRS, D5
2 × $14.32 -
Steering Rack Wave Washer
1 × $1.65 -
Heater Tap & Blanking Plate Gasket
2 × $0.66 -
Blanking Plug, Various Uses
2 × $4.24 -
Temperature Transmitter
1 × $16.50 -
Apron Panel, no mounts, Mini Aftermarket
1 × $342.65
Body-Chassis
- View cart You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart.
-
-
$36.25
Accelerator Pedal, Wider Type
This type of pedal was fitted to the Rover Mini and can be fitted to any Australian Mini
-
-
-
-
Availability: This product is currently out of stock.
Alternator Mounting Bracket Rear Pre A Plus Engines
Can be used on any alternator, However For originality on
Mini Cooper S Mk2 Clubman Gt & Mini K use AYA9189-S
which incorporates coil mounting provision this is a 2/Hand Part
For A Plus engines use CAM4853-S
-
-
-
$242.00
Aftermarket Apron Panel.
For the twin point only as it changed shape to accommodate the front mounted radiator and different bonnet fittings.
-
$575.30
This late front (nose) panel will fit any Mini, with rubber mounted subframes, manufactured after 1976.
It is probably easier to replace the entire panel than to repair a damaged one, especially if it’s been hit more than once!
Early Minis can use # MS4L by also ordering 2 front subframe mounts, part number # 21A2624.
-
$233.75
Apron Panel, Front Lower
Rubber mounted subframe
-
-
$141.63
Apron Panel, Repair Section Front Left Hand
This is the Left Hand Corner Section Only
-
$141.63
Apron Panel, Repair Section Front Right Hand
This is the Right Hand Corner Section Only
-
$227.65
Articulated Bonnet Hinge Kit
For UK Mini Mk3 on only as the hinges are mounted further to the side than the Australian Mini