-
AIR TO COIL CONVERSION KIT - MEDIUM LOAD +2" SPRINGS - 4 STAGE ADJ SHOCKS
1 × $1,610.40 -
Seal, Spark Plug - LH Bank
1 × $10.01 -
Ratchet Flare Nut Wrench 13mm
1 × $42.90 -
Valve Cotter, Pair
2 × $9.90 -
Core Plug 1-5/8 Inch Diameter
2 × $2.09 -
Clamp Exhaust Pipe To Gearbox
2 × $4.40 -
Side Panel Rear Quarter Right Hand, UK Mini
1 × $544.50 -
Valve Guide
1 × $7.70 -
Wheel Spacers & Studs, 3/8" 9.5 mm Thick
1 × $55.00 -
By-pass Hose Adaptor, Long
1 × $22.00 -
BRAKE FLUID TESTER
1 × $55.00 -
SHOCK ABSORBER - FRONT - ALL TERRAIN
1 × $111.10 -
Setscrew, Multi use
1 × $1.05 -
Accelerator Cable, Rover Mini Single Point Injection
1 × $34.65 -
3 Piece Silicone Top Radiator Hose 2.4 PUMA
2 × $105.33 -
Blanking Plug, Various Uses
1 × $4.24 -
Thermostat Housing Spacer
2 × $19.80 -
GASKET, OIL COOLER
2 × $16.71 -
Split Rim 8mm 10 Point Impact Socket 1/2
1 × $13.20 -
Bearing, Idler Gear & Control Arm
2 × $8.95 -
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
1 × $16.78 -
Heater Tap & Blanking Plate Gasket
2 × $0.66 -
Brake Caliper Assembly, RH
1 × $251.32 -
CAP, COOLANT EXPANSION TANK - 200kpa
2 × $11.94 -
Coil Spring Conversion Kit, Firm Ride (Red )
1 × $1,265.00 -
Drain Plug, Mini Van Estate Fuel Tank
2 × $8.80 -
ALLOY WHEEL NUT
1 × $7.70 -
Thermostat Housing
2 × $24.20 -
Boot Kit, Pot Joint, Inboard CV
2 × $11.50 -
Manifold Stud
1 × $1.54 -
Accelerator Pedal Pad, Earlier Mini
2 × $3.30
Body-Chassis
-
-
$36.25
Accelerator Pedal, Wider Type
This type of pedal was fitted to the Rover Mini and can be fitted to any Australian Mini
-
-
-
-
Availability: This product is currently out of stock.
Alternator Mounting Bracket Rear Pre A Plus Engines
Can be used on any alternator, However For originality on
Mini Cooper S Mk2 Clubman Gt & Mini K use AYA9189-S
which incorporates coil mounting provision this is a 2/Hand Part
For A Plus engines use CAM4853-S
-
-
-
$242.00
Aftermarket Apron Panel.
For the twin point only as it changed shape to accommodate the front mounted radiator and different bonnet fittings.
-
$575.30
This late front (nose) panel will fit any Mini, with rubber mounted subframes, manufactured after 1976.
It is probably easier to replace the entire panel than to repair a damaged one, especially if it’s been hit more than once!
Early Minis can use # MS4L by also ordering 2 front subframe mounts, part number # 21A2624.
-
$233.75
Apron Panel, Front Lower
Rubber mounted subframe
-
-
$141.63
Apron Panel, Repair Section Front Left Hand
This is the Left Hand Corner Section Only
-
$141.63
Apron Panel, Repair Section Front Right Hand
This is the Right Hand Corner Section Only
-
$227.65
Articulated Bonnet Hinge Kit
For UK Mini Mk3 on only as the hinges are mounted further to the side than the Australian Mini