-
GUIDE, TIMING CHAIN – 3.0V6 S/C, 5.V8 N/A & S/C
1 × $42.97 -
Alternator Belt
1 × $17.91 -
ALLOY WHEEL NUT
1 × $7.70 -
Idler Pulley
1 × $31.35 -
COIL SPRINGS - REAR - HEAVY LOAD +2"
1 × $440.00 -
Door Latch, RHR
2 × $155.93 -
TENSIONER, PRIMARY DRIVE BELT - AJ V8
1 × $66.84 -
Cable Bracket, Accelerator
1 × $16.50 -
Glass, LH Convex Wing Mirror
2 × $35.81 -
HOSE CLIP MULTI USE
1 × $15.68 -
TURBOCHARGER - 300TDi
2 × $1,078.00 -
2500 Electric Winch - Synthetic Rope
1 × $374.00 -
SENSOR, HEIGHT RHR - D3/RRS
1 × $105.05 -
Fuel Pump Camshaft Alignment Tool - for JLR
1 × $99.00 -
Diesel Injector Removal Tool - for JLR
2 × $358.33 -
Arm, LHF Lower Control
2 × $224.64 -
Grease Nipple Multi Use
2 × $2.70 -
BRAKE FLUID TESTER
1 × $55.00 -
Emblem, For Gear Knob & Key Fobs, Austin Logo 27.4mm dia
2 × $4.68 -
Setscrew, Multi use
2 × $1.05 -
Star Washer, Multi Use
2 × $2.70 -
Ignition & Steering Lock
2 × $165.00 -
Buffer, Door Bump Stop
2 × $2.20 -
Colour Tune, Single Plug Kit, 14mm
2 × $126.50 -
NUT - M16 - FLANGED
1 × $4.13 -
REAR LOWER CONTROL ARM, RIGHT HAND, D3 & D4
1 × $270.66 -
By-pass Hose Adaptor, Long
1 × $22.00
Front Grille
SKU: 24A2158Available
$269.50
Front Grille Assembly to suit Mini Cooper S, Mini Deluxe & Mini K.
1 in stock
Description
Morris Cooper and Cooper S Grille. The wide slats are made in automotive type 430 stainless steel which means any stains created where it would attach to ordinary metal can be polished out. If you fit an internal bonnet locking kit there is a Grille 24A2159 with full top slat – this Grille with the correct surround is often fitted to later cars for the Retro look.
On production cars a chrome over brass grille with a slanted bottom slat was fitted (24A152). This lower slat was changed to a rounded edge as per other slats to comply with safety homologation laws in late 1965 and fitted from Jan 1966 on. The lower pointed slat was deemed as being potentially dangerous to cutting fingers when washing the car. The new grille 24A2158 was fitted to cars in 1966/7 and all subsequent spare parts sales by the factory. Although drawings show aluminium AL/T2 as an alternative material they were only made in automotive s/steel.
Additional information
Weight | 2 kg |
---|---|
Dimensions | 45 × 25 × 8 cm |