-
Valve Guide
1 × $7.70 -
Alldrive Socket Set - 1/4''D 13pc
1 × $71.50 -
CLIP-WASHER JET - HEADLAMP - GENUINE
3 × $4.50 -
NUT, STEEL ROAD WHEEL (16mm)
2 × $2.09 -
CLIP - MOULDING - BODY - FRONT FLARES
2 × $1.65 -
BUSH INNER, FRONT LOWER ARM - L322 RANGE ROVER
2 × $33.50 -
PUMP, VACUUM
2 × $313.67 -
Chrome Plug, Left & Right Hand Doors
2 × $6.44 -
Wiper Switch, Single Speed
1 × $33.00 -
Timing Tool Kit - Land Rover TDV8 4.4L
1 × $715.00 -
SOCKET - DEEP - 1 1/2" - SINGLE HEX - 1/2" DRIVE
1 × $62.43 -
Arm Upper Wishbone LH Front
2 × $146.03 -
Bit Set 100pc
2 × $43.45 -
BRAKE FLUID TESTER
1 × $55.00 -
Shroud, Steering Column
1 × $214.01 -
Side Panel Rear Quarter Right Hand, UK Mini
1 × $544.50 -
HUB NUT SPANNER 52mm
1 × $11.00 -
CREEPER JOINT REAR RADIUS ARMS
1 × $935.00 -
SEAT BELT HOOK - GREY
1 × $4.00 -
Headlamp, 7" Sealed Beam
2 × $16.50 -
Land Rover Assorted Trim Clips 280pc
2 × $165.00 -
TENSIONER - TIMING BELT - 300 TDI - EARLY
1 × $46.20 -
WASHER JET- HEADLAMP - L/H
1 × $43.45 -
Bulb Holder, Suit Smiths Gauges
1 × $11.00 -
6 DEG CASTER CORRECTION RADIUS ARMS
2 × $1,641.32 -
Shroud, Steering Column
1 × $99.00 -
SENSOR - HEIGHT - REAR
2 × $115.50 -
Timing Tool Kit - for Land Rover, Ford, Jaguar
1 × $132.00 -
WIND DEFLECTOR SET - D3/D4
1 × $124.03 -
Battery Lead End Insulator
2 × $3.03
TR6
-
$3.03
Battery Lead End Insulator (Rubber Boot)
Fitted to the end of the battery leads where they attach to the solenoid.
-
$242.00
Boss Kit, Suit Moto-Lita Steering Wheel
-
-
$24.50
Carburettor Dash Pot Spring, Yellow Band
-
$2.31
These screws fit all HS type carburettor butterflies to hold them on the throttle spindle.
-
$2.81
Standard A-series Cylinder Head Nut, Plain
See CAM4545 for flanged nut, Mini & Moke 1979 onward
-
$14.30
Distributor Points Set suit 23D, 25D & 29D Lucas Distributors
These points ‘bolt on’ to the condenser with a nut.
These were fitted up to about 1974 however the distributor is easily changed.
-
-
-
$7.48
Flasher Relay, 2 Pin, Various models
-
-
-
$40.00
Headlamp Bucket (Bowl) Suit 7″ Lamps
This plastic bucket kit includes the inner rim to hold the light unit in place. The headlamp outer rim is not included in the kit.
Qty 2 required per car
-
$40.00
Headlamp Bucket (Bowl) Suit 7″ Lamps
This plastic bucket kit includes the inner rim to hold the light unit in place. The headlamp outer rim is not included in the kit.
Qty 2 required per car
-