-
BOLT, PROPSHAFT UNIVERSAL JOINT
2 × $1.27 -
TAILGATE LATCH, RANGE ROVER SPORT
1 × $274.51 -
Thermostat Housing Stud 48mm (1.9375") Long
1 × $2.82 -
Manifold Stud
1 × $1.54 -
12000 SAMURAI 12V Electric winch with Synthetic rope
1 × $1,595.00 -
Blanking Plate, Heater Tap Outlet
1 × $12.10 -
Headlamp Bucket Kit, (Bowl) Suit 7'' Lamps - BLACK BEZEL
2 × $40.00 -
Reverse Light Switch, Rod Change
2 × $17.60 -
Clip For Tie Rod End Boot, Steering Rack
2 × $13.92 -
Shake Proof Washer, Steering Wheel To Column
1 × $0.33 -
Bearing, Wheel Hub
2 × $93.50 -
Temp Transmitter, Multi Use inc Cooper-S
1 × $16.50 -
OIL FILTER - V8/300TDi/MGB
2 × $11.00 -
Arm, LHF Lower Control
2 × $224.64 -
ALTERNATOR - DISC/SPORT GENUINE
2 × $907.50 -
Long Male Brake Nut 3/8 UNF x 24tpi
2 × $2.42 -
Clip, Interior Trim
2 × $2.86 -
BALL JOINT, A FRAME. ADJUSTABLE & GREASEABLE
2 × $51.70 -
BUMP STOP SPACERS +1"
1 × $110.00 -
EXHAUST BRACKET LH
1 × $8.80 -
LATCH, LHR DOOR
1 × $167.48 -
Door Mirror - LH (Flat Glass)
2 × $88.00 -
Thermostat, 74c, BORG & BECK
2 × $19.58 -
Alternator Conversion Plug, 5 Terminal to 3 Terminal
2 × $33.00 -
ENGINE MOUNT - TD5
2 × $119.35 -
Body Moulding Fixings, MGB 1962 to 1980
1 × $77.28
Body-Chassis
- View cart You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart.
-
Availability: This product is currently out of stock.
Alternator Mounting Bracket Rear Pre A Plus Engines
Can be used on any alternator, However For originality on
Mini Cooper S Mk2 Clubman Gt & Mini K use AYA9189-S
which incorporates coil mounting provision this is a 2/Hand Part
For A Plus engines use CAM4853-S
-
$77.28
Body Moulding Fixings Kit
Items in this package:
6 Stud Plate – AHH6360
42 Round Tuckers moulding clip for 11.3mm moulding gap and 3.2mm panel hole.
6 Nut – No 10 – 3/16 inch UNF x 3/8 inch – HN2005
6 Washer – Single Coil Locking – ID 5mm – WL105001 -
$6.44
Chrome Blanking Plug 3/4″, Left & Right Hand Doors
Fitted on the inside of the doors to conceal the screw in the door handle.
-
-
-
-
-
$16.50
Felt, Door Glass to Inner Door Mould
Clips on the inner chrome strip, this protects the glass and door from junk entering in and making a noise.
Suits Australian windup window cars- Both Morris & Leyland- Left & Right.
Clips to hold these on are the same as the outer # 34 G939.
-
$21.78
MGB Gearbox Steady Bush Kit with Strap.
Kit contains upper and lower rear gearbox mount bushes (AHH7854) plus the strap and fixings.
-
$40.00
Headlamp Bucket (Bowl) Suit 7″ Lamps
This plastic bucket kit includes the inner rim to hold the light unit in place. The headlamp outer rim is not included in the kit.
Qty 2 required per car
-
$40.00
Headlamp Bucket (Bowl) Suit 7″ Lamps
This plastic bucket kit includes the inner rim to hold the light unit in place. The headlamp outer rim is not included in the kit.
Qty 2 required per car
-
Availability: This product is currently out of stock.
Ignition Switch, On Dash
-
$1.65
Window Winder pad
Sold Individually. Qty 2 required per car
-
$1.60
Screw, 1/4″ x 5/8″ Countersunk.
Multi use including; Drive Flange to Disc Rotor, Door hinges, striker plates, Distributor drive housing, half shafts and body components.
-
$0.39
Screw, Door Handle & Window Winder from 1965 to 1971
This is the original screw that was used on the inner door handle and the window winder handle.
Secures handle to door.