-
Ratchet Flare Nut Wrench 14mm
1 × $35.20 -
Setscrew, Multi use
2 × $1.05 -
LAMP, FLASHER REAR AMBER (NO BULB)
2 × $12.93 -
HEADLAMP BULB, MAIN BEAM
1 × $95.48 -
ADAPTOR - HEATER HOSE - WATER MANIFOLD - RANGE ROVER L322 - 4.4LTR V8
2 × $23.87 -
FILTER FUEL, PRIMARY
2 × $107.97 -
Heater Tap & Blanking Plate Gasket
1 × $0.66 -
Thermostat Housing Stud 48mm (1.9375") Long
3 × $2.82 -
Blanking Plug, Various Uses
2 × $4.24 -
Pump, Windscreen Washer - Discovery 2, Defender & Freelander
2 × $17.33 -
Heater Tap
1 × $44.00 -
Thermostat Housing Stud, 52 mm
2 × $2.86 -
DIAGNOSTIC TOOL PRO - ALL LAND ROVER
1 × $1,650.00 -
HOSE - THROTTLE BODY HEATER OUTLET
1 × $26.40 -
Oxygen ambient air sensor with Rover Mini Fuel injected
2 × $90.75 -
Apron Panel, Repair Section Front R/Hand
1 × $141.63 -
TENSIONER - MAIN BELT - 300 TDI - DEFENDER - DISCOVERY 1 - RANGE ROVER CLASSIC
1 × $95.48 -
Thermostat Housing
1 × $24.20 -
Manifold Stud
4 × $1.54 -
Diesel Injector Copper Washer Remover/Installer
1 × $93.50 -
Master Cylinder Tank, Plastic
2 × $44.00 -
Viscous Fan Spanner 32/36mm
1 × $49.50 -
TENSIONER, PRIMARY DRIVE BELT - AJ V8
1 × $66.84 -
By-pass Hose Adaptor, Long
2 × $22.00 -
Diesel Timing Kit - Land Rover 3.6 V8
2 × $605.83 -
Bolt - Clutch Diaphragm to Flywheel
1 × $7.70 -
Sensor, Steering Rotation / Clock Spring
2 × $99.33 -
Temperature Transmitter
2 × $16.50 -
Distributor Cap, Screw On Type, Rover Mini, 1992 To 1997
2 × $15.40 -
CV Dust Boot Clamp Installer with Cutter
1 × $38.50 -
PISTON ASSEMBLY- 300 TDI - STD SIZE
1 × $157.47 -
Thermostat Housing Spacer
2 × $19.80
Front Grille
SKU: 24A2158Available
$269.50
Front Grille Assembly to suit Mini Cooper S, Mini Deluxe & Mini K.
1 in stock
Description
Morris Cooper and Cooper S Grille. The wide slats are made in automotive type 430 stainless steel which means any stains created where it would attach to ordinary metal can be polished out. If you fit an internal bonnet locking kit there is a Grille 24A2159 with full top slat – this Grille with the correct surround is often fitted to later cars for the Retro look.
On production cars a chrome over brass grille with a slanted bottom slat was fitted (24A152). This lower slat was changed to a rounded edge as per other slats to comply with safety homologation laws in late 1965 and fitted from Jan 1966 on. The lower pointed slat was deemed as being potentially dangerous to cutting fingers when washing the car. The new grille 24A2158 was fitted to cars in 1966/7 and all subsequent spare parts sales by the factory. Although drawings show aluminium AL/T2 as an alternative material they were only made in automotive s/steel.
Additional information
Weight | 2 kg |
---|---|
Dimensions | 45 × 25 × 8 cm |