-
BRAKE WEAR SENSOR, FRONT - RANGE ROVER SPORT
2 × $15.13 -
Headlamp, 7" Sealed Beam
2 × $16.50 -
Revive Refill - 750ml
2 × $92.40 -
ALTERNATOR - TDV6 D4/RRS (GEN)
1 × $660.00 -
400 amp snap connectors.
2 × $60.81 -
Side Panel Rear Quarter Right Hand, UK Mini
1 × $544.50 -
Valve Cotter, Pair
1 × $9.90 -
SENSOR - MAF
1 × $105.33 -
Accelerator Cable Connector
2 × $6.38 -
CLIP-WASHER JET - HEADLAMP
2 × $4.40 -
Generator, C40. Jag, L/R, Austin, Mini, MG, Triumph
2 × $236.67 -
Blanking Plate, Heater Tap Outlet
1 × $12.10 -
Brake Master Cylinder, MGB, 1968 - 1974 USA Model
1 × $159.50 -
Radiator Blanking Cap, Moke (Original equipment)
1 × $14.40 -
Master Cylinder Tank, Plastic
2 × $44.00 -
Gasket, Cylinder Head, Standard
1 × $16.50 -
COOLANT HOSE/TUBE - 3.0V6 & 5.0V8 S/C
2 × $46.75 -
LATCH, RHR DOOR
2 × $167.48 -
Brake Master Cylinder, MGB Dual Line 1975-1980 & GT
1 × $247.50 -
12000 SPARTAN WINCH 12V WITH STEEL ROPE
2 × $825.00 -
Carburettor Throttle Disc Screw
2 × $2.31 -
Temperature Transmitter
3 × $16.50 -
Grease Nipple Multi Use
2 × $2.70 -
Wheel Nut & Washer, Suit Minilite & Wolfrace Wheels
1 × $5.50 -
Setscrew, Multi use
2 × $1.05 -
Wire Brush 4 Row
1 × $6.60 -
By-pass Hose, Standard
1 × $5.94 -
Washer Flat, Front and Rear Shock Absorber
1 × $0.77 -
Bolt, Remote Control to Diff Housing
1 × $1.10 -
Ball Joint Lock Tab
2 × $5.50
Eezibleed Kit
SKU: G4062Available
$96.80
Easy fluid replacement system using air pressure from the spare wheel to bleed brake and clutch hydraulics. Safe to use, the one-way flow mechanism and airtight seal on the reservoir ensures fast fluid replacement with no contamination. There is no need for pedal pumping which avoids the risk of damaging the master cylinder seal. The versatile kit includes four screw caps (25, 27, 44-45, 46mm) and three hoses, making it easy to connect Eezibleed to a wide variety of vehicles.
Suitable for single handed operation. Uses the air pressure from a spare tyre to effortlessly bleed hydraulic systems.
Can be used successfully on the following systems: tandem master cylinders without sensors, tandem reservoirs, slave servos, vacuum servos.
Includes a range of cap & seal sizes: 25mm (Lockheed systems), 27mm (certain VAG systems), 44/45mm (metal Girling reservoirs & all ATE systems), 46mm (certain Girling systems).
Kit contains: pressure bottle (for new brake fluid), bottle cap assembly, bleed tube set, 5x cap & seal sets, brass reservoir cap fitting, 2x fibre washers, lock nut & hook.
Also available in the Eezibleed range: The Pro Brake Bleeder, Part No. 77021 & multipurpose caps Part Nos. G4058 (15mm to 67mm neck/bayonet fittings) & 77042 (multi-shape openings up to 80mm).
1 in stock
Description
Gunson Tools
Additional information
Weight | 1 kg |
---|---|
Dimensions | 10 × 10 × 5 cm |