-
Master Cylinder Tank, Plastic
2 × $44.00 -
Cylinder Head Stud, Short
3 × $13.00 -
Fuel Injector Remover - for JLR
2 × $225.23 -
OIL COOLER, ENGINE
1 × $214.83 -
By-pass Hose Adaptor, Long
3 × $22.00 -
Fuel Bowl Float Suit 1-1/4", 1-1/2" & 1-3/4" SU
2 × $62.15 -
BRAKE FLUID TESTER
1 × $55.00 -
Adjustable Height Suspension Kit
2 × $286.72 -
Carburettor Throttle Disc Screw
2 × $2.31 -
SWITCH, WASH/WIPER (LUCAS)
2 × $40.43 -
ABS SENSOR, REAR - DISCOVERY 2
2 × $55.12 -
Bolt, Crown Wheel To Hemisphere Housing 2/Hand
1 × $1.50 -
Heater Tap
2 × $44.00 -
HT Lead Ignition Spark Tester
1 × $49.50 -
BOLT, PROPSHAFT UNIVERSAL JOINT
2 × $1.27 -
Headlamp, 7" Sealed Beam
2 × $16.50 -
Blanking Plate, Heater Tap Outlet
1 × $12.10 -
Sheer Nut, Steering Column Clamp
1 × $4.40 -
Wheel Cylinder Assembly Left Hand Bore
1 × $30.80 -
Mirror Glass, RH Convex
1 × $59.68 -
FILTER - AIR V12 upto '88 MANN
2 × $46.20 -
Accelerator Cable, Long Nylon Sleeved
1 × $19.25 -
Windscreen Washer T-Piece
1 × $10.78 -
AIR TO COIL CONVERSION KIT MEDIUM +2" - DISCOVERY 2
2 × $533.50 -
Bolt, Front Sub Frame Tower to Body, (Dry)
2 × $13.20 -
Side Panel Rear Quarter Left Hand, UK Mini
1 × $544.50 -
Thermostat Housing
1 × $24.20 -
Control Arm Kit, Front Upper, EN36T
1 × $42.63
TR2-5
-
$3.03
Battery Lead End Insulator (Rubber Boot)
Fitted to the end of the battery leads where they attach to the solenoid.
-
$2.53
LH & RH Front
Bleed nipple for front wheel cylinders on twin leading shoe type set ups, this is where you have 2 cylinders per hub
Will also fit front calipers on disc assemblies
-
$242.00
Boss Kit, Suit Moto-Lita Steering Wheel
-
-
Availability: This product is currently out of stock.
Brake Light Switch, Hydraulic, Multi Use
-
$14.30
Bulb Holder, Suit Centre Mounted Speedo
-
$0.55
This is the screw that holds the top of the fuel bowl down.
It also holds the dashpot on to the body of the SU.
-
$24.50
Carburettor Dash Pot Spring, Yellow Band
-
-
$2.31
These screws fit all HS type carburettor butterflies to hold them on the throttle spindle.
-
$33.00
Carburettor Throttle Disc, Suit 1 1/2″ SU HS4 Carburettor
-
-
$2.81
Standard A-series Cylinder Head Nut, Plain
See CAM4545 for flanged nut, Mini & Moke 1979 onward
-
$14.30
Distributor Points Set suit 23D, 25D & 29D Lucas Distributors
These points ‘bolt on’ to the condenser with a nut.
These were fitted up to about 1974 however the distributor is easily changed.
-