-
BRAKE BACK PLATE - RH REAR
2 × $115.01 -
BELT, SECONDARY DRIVE (SUPERCHARGER)
2 × $65.68 -
WRENCH, WHEEL NUT - HEAVY DUTY
2 × $20.63 -
Bearing Roller Type, 2nd & 3rd Gear
2 × $33.00 -
Wheel Cylinder Assembly, LHF 15/16"
1 × $24.20 -
Thermostat Housing Spacer
2 × $19.80 -
Brake Hose Kit, Front & Rear, Disc Brake
1 × $68.20 -
Idler Pulley
1 × $31.35 -
Seat Trim Clip
1 × $0.47 -
Trunk Boot Seal, MGA
1 × $28.60 -
Thermostat, 74c, BORG & BECK
1 × $19.58 -
CAP, COOLANT EXPANSION TANK - 200kpa
2 × $11.94 -
Heater Tap & Blanking Plate Gasket
2 × $0.66 -
Distributor Cap, Suit 43D, 45D & 59D Distributor
2 × $13.20 -
CHAIN - TIMING - PRIMARY
2 × $107.42 -
BLADE - WIPER
2 × $23.87 -
Rocker Arm Bush
3 × $7.15 -
VOLTAGE STABILIZER
1 × $44.00 -
Nut, 3/16'' UNF, Multi Use
1 × $0.39 -
Thermostat Housing Stud, 52 mm
2 × $2.86 -
ALLOY WHEEL NUT
2 × $7.70 -
Long Male Brake Nut 3/8 UNF x 24tpi
2 × $2.42 -
Valve Guide
2 × $7.70 -
RH Tail Lamp Assy, 3 Screw Type
1 × $185.00
MINI
-
-22%Original price was: $1,402.50.$1,100.00Current price is: $1,100.00.
8.4″ Disc Brake Kit, Convert Drum Brakes to Disc Brakes
This kit is Suitable For 12″ or 13″Â Wheels. Will Not Fit 10″ Wheels
This kit includes every nut bolt and component necessary including uprights, bearings, ball joints, CV joints, brake discs (rotors), drive flanges, calipers. All new parts, not built up, but a fairly easy to bolt-on installation so you can check the parts and you need to partially strip to fit. Refer to workshop manual for torque settings.
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
$13.20
Abutment Bracket, Metal bracket that fits between the manifold for HS4 Carburettor
To secure cable to carburettor use # AYH9377
-
$77.00
Abutment Bracket. Metal bracket that fits between the Manifold HIF44 (1.75″) & HIF38 SU Carburettors. Â
For HS4 Carburettor use # 12G766S
To secure cable to carburettor use # AYH9377 clip
-
-
-
-
$34.65
Accelerator Cable, Rover Mini Single Point Injection
Suits Mini 1990 on with the 1275cc engine.
-
-
-
-
$36.25
Accelerator Pedal, Wider Type
This type of pedal was fitted to the Rover Mini and can be fitted to any Australian Mini
-
$7.92
Adaptor Between Carburettor & Air Cleaner, 1 1/4″ SU. This is a 2nd Hand part in good condition.
-
$16.78
Adaptor Fuel Bowl To Carby  L/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about 1 o’clock position.
-
$16.78
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about ’11 o’clock position.