-
AIR TO COIL CONVERSION KIT - MEDIUM LOAD +2" SPRINGS - 4 STAGE ADJ SHOCKS
1 × $1,610.40 -
Seal, Spark Plug - LH Bank
1 × $10.01 -
Ratchet Flare Nut Wrench 13mm
1 × $42.90 -
Valve Cotter, Pair
2 × $9.90 -
Core Plug 1-5/8 Inch Diameter
2 × $2.09 -
Clamp Exhaust Pipe To Gearbox
2 × $4.40 -
Side Panel Rear Quarter Right Hand, UK Mini
1 × $544.50 -
Valve Guide
1 × $7.70 -
Wheel Spacers & Studs, 3/8" 9.5 mm Thick
1 × $55.00 -
By-pass Hose Adaptor, Long
1 × $22.00 -
BRAKE FLUID TESTER
1 × $55.00 -
SHOCK ABSORBER - FRONT - ALL TERRAIN
1 × $111.10 -
Setscrew, Multi use
1 × $1.05 -
Accelerator Cable, Rover Mini Single Point Injection
1 × $34.65 -
3 Piece Silicone Top Radiator Hose 2.4 PUMA
2 × $105.33 -
Blanking Plug, Various Uses
1 × $4.24 -
Thermostat Housing Spacer
2 × $19.80 -
GASKET, OIL COOLER
2 × $16.71 -
Split Rim 8mm 10 Point Impact Socket 1/2
1 × $13.20 -
Bearing, Idler Gear & Control Arm
2 × $8.95 -
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
1 × $16.78 -
Heater Tap & Blanking Plate Gasket
2 × $0.66 -
Brake Caliper Assembly, RH
1 × $251.32 -
CAP, COOLANT EXPANSION TANK - 200kpa
2 × $11.94 -
Coil Spring Conversion Kit, Firm Ride (Red )
1 × $1,265.00 -
Drain Plug, Mini Van Estate Fuel Tank
2 × $8.80 -
ALLOY WHEEL NUT
1 × $7.70 -
Thermostat Housing
2 × $24.20 -
Boot Kit, Pot Joint, Inboard CV
2 × $11.50 -
Manifold Stud
1 × $1.54 -
Accelerator Pedal Pad, Earlier Mini
2 × $3.30 -
Rocker Arm Bush
5 × $7.15 -
Door Trim Blank Card, Mini Deluxe/K/''S''
1 × $42.63 -
By-pass Hose, Standard
2 × $5.94
Suspension
-
$616.00
Conversion Kit, Rubber Universal to Pot Joint. aka Inner CV joint
-
$13.20
Bronze type bush in the centre of all Crown Wheels in the gearbox. Plus another one is in the Differential Case opposite the end of where the Crown Wheel fits.
The bush after fitting will need to be reamed.
-
-
$21.51
CV Nut for Disc Brakes, 7.5″ & 8.4″ Discs
For use on standard imperial threaded CV Joints as originally fitted.
Socket size for this nut is 1 5/16″. Socket # 0925
Not for Mini Cooper use # 21A79
-
$15.40
The large sintered, cone washer that goes behind the hub nut on the CV joint.
Fitted on all Mini’s with the large type CV joint when 7.5″ & 8.4″ disc brakes are fitted
-
$15.40
Bush, Diff Housing for selector shaft (2 Required)
The bronze bush in the differential housing that the gear change selector rod sits through which should be lightly greased.
-
Availability: This product is currently out of stock.
Bush, Diff Side Cover, Standard Size
2 required per gearbox
Suit Rubber Universal, Mini & Moke -
$8.21
Dowel, Steering Arm to Swivel Hub
These are the dowels that fit in the front hub to locate the steering arms.
There are two dowels required per hub
Bolts for these are # 2A4315 and the locktabs are # 2K5377
-
-
-
-
-
$125.40
Front Shock Absorber
Standard Height, Gaz Brand Adjustable
Sold Individually, But Advisable to fit in Pairs
-
-