-
Ball Joint Kit, Front
2 × $27.50 -
Ratchet Flare Nut Wrench 8mm
1 × $38.50 -
RADIATOR - 4.0 V6 & 4.2/4.4 V8 D3/D4/RRS
1 × $429.00 -
Gasket, Cylinder Head, Standard
1 × $16.50 -
Rocker Arm Bush
3 × $7.15 -
Adjustable Height Suspension Kit
2 × $286.72 -
Adjustable Front Lower Arm Kit
2 × $209.00 -
RESERVOIR, RADIATOR OVERFLOW
1 × $95.48 -
WRENCH, WHEEL NUT - HEAVY DUTY
1 × $20.63 -
Emblem, For Gear Knob & Key Fobs, Cooper Logo 27.4mm dia
1 × $4.68 -
Bolt - Clutch Driving Strap to Flywheel
1 × $7.81 -
HUB, WHEEL - DISCOVERY SPORT/ RANGE ROVER EVOQUE/JAGUAR E-PACE
2 × $185.96 -
Universal Joint Greasable type, GKN Brand
1 × $25.96 -
Temperature Transmitter
1 × $16.50 -
Carburettor Kit Suit HS6 1-3/4"
2 × $63.25 -
Thermostat Housing Spacer
1 × $19.80 -
GEAR LEVER - REPAIR KIT - TRIUMPH - SPITFIRE - HERALD
2 × $45.00 -
Long Male Brake Nut 3/8 UNF x 24tpi
2 × $2.42 -
500KG 240V ELECTRIC HOIST
2 × $306.08 -
BEZEL, HEADLAMP STAINLESS STEEL
2 × $31.63 -
SHOCK ABSORBER - FRONT - BIG BORE EXPEDITION +2in
1 × $190.30 -
Thermostat Housing Stud 48mm (1.9375") Long
3 × $2.82 -
Adjustable Suspension Height Kit, Front, Ripspeed Type
2 × $183.70 -
Sensor, Steering Rotation / Clock Spring
1 × $99.33 -
HOSE CLIP MULTI USE
1 × $15.68 -
Heater Tap & Blanking Plate Gasket
5 × $0.66 -
BALL JOINT, A FRAME. ADJUSTABLE & GREASEABLE
2 × $51.70 -
SHOES - PARK BRAKE KIT - INCLUDES PINS & CLIPS
2 × $52.53 -
Pinch Bolt, Steering Column to Steering Rack
1 × $0.66 -
WASHER JET - HEADLIGHT - L/H
1 × $26.00 -
Blanking Plate, Heater Tap Outlet
1 × $12.10 -
Universal Joint
1 × $25.03 -
HT Lead Ignition Spark Tester
1 × $49.50 -
Bush Kit, Lower Control Arm to Subframe, Competition
1 × $46.20 -
Starter Switch Push
4 × $86.90 -
Thermostat Housing
1 × $24.20 -
INDICATOR LAMP, SIDE FLASHER
2 × $28.64 -
Flywheel Locking Tool - for JLR Diesel Engines
1 × $231.00 -
Side Panel Rear Quarter Right Hand, UK Mini
1 × $544.50 -
Fuel Injector Remover - for JLR
2 × $225.23 -
Bush Set, Tie Bar Poly Silicone
1 × $18.76
Suspension
-
-
-
$11.39
Front Upper Bump Stop, Left & Right hand side.
Dry Suspension
Mounted With 1 Bolt
-
$46.20
Bush Kit, Lower Control Arm to Subframe. 1 Kit required per Car
These metal sleeved bushes are specially angled to compensate for the newly formed angles of your car’s geometry when the car is set up properly for competition use.Â
Introduced in Nov 2003 because of longevity problems with the rubber type when geometry settings are changed. Bushes need to be able to flex when castor/camber angles are changed, therefore these will be good up to 3.5 degrees of castor angle or any standard car that ruins other bushes. Although more expensive than poly or standard type this type will usually last much longer than most other types.
-
$18.76
Tie Bar Poly Silicone 4 Piece Bush Set, Comes with small grease sachet.
Suits Mini & Moke
-
-
-
-
$1,265.00
This Kit is a direct-replacement that includes everything to replace the rubber cones with coil springs.Â
The Special hard anodized aluminum perches allow the springs to be fitted to either the stock trumpets or Hi-Lo’s.
The highest quality progressive winding has been used to make the springs, which should ensure that the springs will not sag after years of use as the rubber cones tend to do.
Available in three spring rates: C-SRP100 soft (Blue), C-SRP200 Firm (Red) and C-SRP250 competition spec.
We do not recommended these for road use as the spring can dislodge when hitting holes in bad roads especially cars with lowered Suspension. All suspension modifications should be carried out by professionals.
-
$110.00
Competition Front Bump Stop Kit
Front progressive bump stop kit for hydrolastic cars. Mounting brackets and rubbers.
Improves car handling especially under braking and when fully loaded.
-
$63.80
Rear progressive bump stop kit for hydrolastic cars. Mounting brackets and rubbers.
The rearward pitch under hard acceleration can be minimized by the fitting of progressive bump stop kits. This also improves the car’s handling when fully loaded. -
-
-
-
$151.80
Conversion Kit, Rubber Universal to Pot Joint. aka Inner CV joint
This kit does not contain Pot Joints