-
BULB - HOLDER - REPAIR KIT
1 × $7.50 -
Y Piece Engine Breather Hoses Twin carburettors
1 × $8.25 -
Badge, Bonnet
1 × $84.70 -
Beaver Panel, RHS
1 × $80.00 -
Adjuster Nut, Handbrake Cable to Lever
1 × $1.98 -
Socket 1/2''D 18mm
1 × $7.70 -
Carburettor Throttle Disc Screw
2 × $2.31 -
Diesel Injector Extractor - for JLR 2.7, 3.6 engines
2 × $217.25 -
VALVE, FRONT AXLE TRANSFER RELIEF - L322 RANGE ROVER
1 × $215.22 -
Carburettor Dashpot Spring, Red Band
1 × $21.51 -
SENSOR, HEIGHT LHR - D3/RRS
1 × $105.05 -
Grease Nipple Multi Use
1 × $2.70 -
LEFT HAND CAMSHAFT COVER GASKET
2 × $35.81 -
Wiper Washer Switch Assembly Rover Mini
1 × $85.20 -
WASHER JET- HEADLAMP - L/H
1 × $43.45 -
Setscrew, Multi use
3 × $1.05 -
NUT, STEEL ROAD WHEEL (16mm)
1 × $2.09 -
VALVE - HEATER - NO BRACKET
1 × $119.35 -
SCRIVET
1 × $1.05 -
Thermostat, 82c
1 × $11.55 -
DIAGNOSTIC TOOL SINGLE USER LOGIC4
1 × $715.00 -
Brake Booster, 1.9: 1
1 × $278.25 -
Rotor Arm, 45D Distributor
2 × $6.60 -
WIND DEFLECTOR SET - D3/D4
1 × $124.03 -
Panel Clip Retainer - for Ford, Land Rover
1 × $3.50 -
Pump, Engine Oil - TDV6
1 × $193.50 -
By-pass Hose Adaptor, Long
1 × $22.00 -
GASKET, INTERCOOLER TO INLET MANIFOLD, 5.0L V8
1 × $111.22
Body Electrics
-
$50.05
Courtesy Door Lamp Switch or Door Light Switch.
This type is fitted with one screw.
Sometimes called an interior light or lamp Switch.
-
$272.86
Distributor, A+ Electronic Type With Module On The Side
Electronic Ignition distributor, fitted as standard to all 1300 Carb Cooper models. Also Metro 1275cc engine.
Replacement service items for this are:
Cap GDC156
Rotor arm GRA2260
-
$11.00
Distributor Cap for Ducellier distributor
Which also requires # RTC6620 Condenser, # GCS2119 points and # RTC4933 Rotor arm
With this Distributor Cap – nothing else will fit
-
$15.40
Distributor Cap Screw On Type, 65D
This was the first Mini distributor cap to have screws hold the cap to the body from about 1990 on, when electronic ignition was introduced. Therefore there is no points or condenser but the rotor arm to use is # GRA2260.
Fits all 1992 onwards injection cars up until 1997.
-
-
$13.20
Distributor Cap, suits 43D, 45D & 59D type distributors
This is the top entry type capÂ
Also known as # GDC136
-
$20.85
Distributor Cap suits 43D, 45D & 59D type distributors.
This is the top entry type
Lucas Brand. This cap has brass contacts instead of aluminium for better conductivity.
-
$19.80
Distributor Cap, Top entry 23D
Convert that side entry cap to a later model top entry, you then will get a larger range of leads and more reliability. This is much less prone to wet-weather problems.
-
-
-
-
$14.30
Distributor Points Set suit 23D, 25D & 29D Lucas Distributors
These points ‘bolt on’ to the condenser with a nut.
These were fitted up to about 1974 however the distributor is easily changed.
-
-
$11.00
Distributor Rotor Arm,
Suit Lucas Australian Made 29D distributor,
NOS
-
$93.89
Distributor Vacuum Advance Unit, Suit 65D Type Distributor 1990 -1993 With HIF44 Carburettor
Other Service Parts To suit 65D Distributor
Distributor Cap # GDC156  Rotor Arm # GRA2143