-
NYLOC NUT - MULTI USE
2 × $5.39 -
TURRET SECURING FRONT
1 × $60.50 -
Wind Deflector Set Freelander 2
1 × $109.73 -
Sensor, Camshaft Position
2 × $72.00 -
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
2 × $16.78 -
GASKET, OIL COOLER
1 × $16.71 -
Thermostat Housing Spacer
1 × $19.80 -
BEARING, REAR WHEEL - RANGE ROVER EVOQUE & JAGUAR MODELS
2 × $42.97 -
GUIDE, TIMING CHAIN – 3.0V6 S/C, 5.V8 N/A & S/C
1 × $42.97 -
Coil Ignition
2 × $88.00 -
Pinch Bolt, Steering Column to Steering Rack
1 × $0.66 -
Carburettor Kit Suit HIF4 SU
1 × $102.30 -
SENSOR - MAF
1 × $105.33 -
Wiper Motor Brush Set, Suit UK made Wiper Motors
1 × $42.02 -
Carburettor Throttle Disc Screw
2 × $2.31 -
BUSH, FRONT RADIUS ARM (2 TUBE)
1 × $13.48 -
COOLANT HOSE/TUBE - 5.0 V8 N/A
1 × $42.97 -
Thermostat, 74c, BORG & BECK
2 × $19.58 -
HT Lead Ignition Spark Tester
1 × $49.50 -
BOLT, PROPSHAFT UNIVERSAL JOINT
2 × $1.27 -
Sheer Bolt, Steering Column Clamp
1 × $6.60 -
Starter Switch Push
2 × $86.90 -
Tensioner, Drive Chain
1 × $33.42 -
CLIP-WASHER JET - HEADLAMP
2 × $4.40 -
Adaptor Fuel Bowl To Carby L/Hand 30 Degree
2 × $16.78 -
Diesel Injector Extractor - for JLR 2.7, 3.6 engines
1 × $217.25 -
Carburettor Jet Bearing Kit, 1-1/2'' SU
1 × $27.48
Steering
-
$9.85
Badge in centre of MK II Mini Steering Wheel Pad
-
$8.80
Bolt – Steering Arm to Swivel Hub
Mini & Moke – 2 per steering arm – 4 per vehicle -
$242.00
Boss Kit, Suit Moto-Lita Steering Wheel
-
$22.00
Boss Centre, this suits the Formula Steering Wheel, as fitted to Leyland Mini S and some Mokes
This is new old stock (centre only as per photo)
Please note; this is for the Formula Steering Wheel Not the Formuling Steering wheel that was fitted to Mokes
-
-
$25.14
Centre Cap for 3 Spoke Steering Wheel
“MINI” is written on the Centre
-
-
-
$8.21
Dowel, Steering Arm to Swivel Hub
These are the dowels that fit in the front hub to locate the steering arms.
There are two dowels required per hub
Bolts for these are # 2A4315 and the locktabs are # 2K5377
-
Availability: This product is currently out of stock.
Clamp for the Breather Tube to Carburettor or Steering Rack Boot, Small End. Mini & Moke.
-
$165.00
Ignition & Steering Lock Complete assembly includes 2 x shear bolts, lock, 2 x keys, ignition switch & barrel assembly.
Wiring loom has a four-pin plug.
Fitted from MK4 Mini (1976 to 1996) up to the introduction of MPI which had airbags fitted and different steering column and switch. MPI cars used # QRF100750 switch.
-
Availability: This product is currently out of stock.
Ignition & Steering Lock, Suit Australian Mini From 1971 To 1980.
-
-
$20.30
Lock nut for Steering Ball Housing
-
$572.00
Moto-Lita Wood Steering Wheel, 13″ Dished
Boss Sold Separately