-
Grease Nipple Multi Use
1 × $2.70 -
OIL FILTER - V8/300TDi/MGB (RECOVERY)
2 × $9.35 -
WASHER, SHOCK MOUNT
1 × $1.09 -
Setscrew, Multi use
1 × $1.05 -
IGNITION BARREL & KEY
1 × $12.99 -
Headlamp, 7" Sealed Beam
1 × $15.99 -
LEFT HAND, REAR QUARTER SIDE PANEL - UK MINI
1 × $535.00 -
Water Pump Pulley
1 × $20.35 -
Electronic Ignition Conversion Kit Suit 43D, 45D & 59D Type Distributor
1 × $72.00 -
Heater Tap
1 × $44.00 -
Exterior Mirror, Rectangular Plastic
1 × $26.62 -
CLUTCH & BRAKE MASTER CYLINDER REPAIR KIT
1 × $27.01 -
Distributor Cap, Suit 43D, 45D & 59D Distributor
1 × $13.00 -
Water Pump, Standard Capacity, Solid Impeller
1 × $68.20 -
Welch Plug, 1.326" diameter
1 × $2.75 -
SEAL, FUEL SENDER UNIT
1 × $1.00 -
Valve Stem Seal
1 × $4.00
Cooling and Heating
-
$2.86
These are the special studs for the thermostat housing – 5/16 dia x 52mm o/all length with unc one end and unf the other.
Suits housings without engine steady bracket.
-
$5.25
Thermostat Housing Stud, 76 mm
If your thermostat has a sandwich plate under it, you will need these longer studs. The washers are # GFK1114 and the nuts are # FNZ505.
5/16″ bolt 3″long, unc bolt with unf nut end.
Also used as a differential housing to case stud.
-
$82.50
Thermostat Housing, to suit Late 1275 Moke and 1275 LS Mini’s.
-
$28.14
Thermostat Housing, Plug in Top
New Old Stock
-
-
-
-
$18.76
Top Radiator Bracket
Mini Moke, 998cc, Late this type is fitted when the radiator inlet & outlet pipes are on the same side and the thermostat housing outlet point to the rear of the car.
Part number for Thermostat housing # CAM4044
-
-
-
$15.40
This hose suits cars where the top hose outlet points to the firewall of the car.
-
$28.33
This hose suits cars where the top hose outlet points to the firewall of the car.
-
-
-