-
COOLANT HOSE/TUBE - 3.0V6 & 5.0V8 S/C
2 × $46.75 -
CAP - MASTER CYLINDER - PLASTIC - TIN TANK TYPE
1 × $9.90 -
Wiper Switch, Toggle Type (Two Speed)
1 × $75.35 -
Valve Guide
3 × $7.70 -
BUSH, FRONT of REAR UPPER CONTROL ARM - DISCOVERY 3, 4 & RANGE ROVER SPORT
2 × $21.01 -
AIR FILTER - BMW MINI
1 × $22.00 -
BRAKE MASTER CYLINDER - SERIES III LWB DUAL LINE
2 × $140.00 -
12v/ 240v PORTABLE 45L FRIDGE FREEZER
2 × $1,228.15 -
Air Pre-Heat Duct, On Manifold
1 × $13.20 -
Filter, Engine Oil - 3.0L TDV6
2 × $17.60 -
Bearing Set, Con Rod, +0.030"
1 × $52.80 -
Coil, Ignition
2 × $73.43 -
WATER PUMP - 2.5L - KV6 motor
1 × $72.34 -
Brake Booster, 1.9: 1
1 × $278.25 -
Thermostat Housing Stud 48mm (1.9375") Long
2 × $2.82 -
Timing Chain Tensioner
2 × $55.83 -
BRAKE FLUID TESTER
1 × $55.00 -
EXHAUST BRACKET LH
2 × $8.80 -
Body Moulding Fixings, MGB 1962 to 1980
1 × $77.28
MGB and MGB GT
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
$16.78
Adaptor Fuel Bowl To Carby  L/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about 1 o’clock position.
-
$16.78
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about ’11 o’clock position.
-
-
$7.70
Alternator Adjusting Link,
This is a Second Hand Part
-
-
Availability: This product is currently out of stock.
Alternator Mounting Bracket Rear Pre A Plus Engines
Can be used on any alternator, However For originality on
Mini Cooper S Mk2 Clubman Gt & Mini K use AYA9189-S
which incorporates coil mounting provision this is a 2/Hand Part
For A Plus engines use CAM4853-S
-
$128.15
ANGLE DRIVE ADAPTER – SPEEDO CABLE
-
$6.60
Battery Cable Earth, Battery to Body with Screw in fitting.
Suits Mini 1985 – 2001, MGB
New Old Stock
-
$3.03
Battery Lead End Insulator (Rubber Boot)
Fitted to the end of the battery leads where they attach to the solenoid.
-
-
$2.53
LH & RH Front
Bleed nipple for front wheel cylinders on twin leading shoe type set ups, this is where you have 2 cylinders per hub
Will also fit front calipers on disc assemblies
-
-
$77.28
Body Moulding Fixings Kit
Items in this package:
6 Stud Plate – AHH6360
42 Round Tuckers moulding clip for 11.3mm moulding gap and 3.2mm panel hole.
6 Nut – No 10 – 3/16 inch UNF x 3/8 inch – HN2005
6 Washer – Single Coil Locking – ID 5mm – WL105001 -
$242.00
Boss Kit, Suit Moto-Lita Steering Wheel