-
Caliper Seal Kit, Suit 8.4" Discs
1 × $23.41 -
Distributor Assembly, 45D Points Type With Vac Advance
1 × $104.50 -
COOLANT HOSE/TUBE - 3.0V6 & 5.0V8 S/C
1 × $46.75 -
By-pass Hose Adaptor, Long
2 × $22.00 -
Adjustable Suspension Height Kit, Front, Ripspeed Type
1 × $183.70 -
Bearing, First Motion Shaft, MGB 3 Synchro
1 × $44.00 -
Water Pump
1 × $86.28 -
EXHAUST BRACKET
2 × $4.40 -
Blanking Plate, Heater Tap Outlet
1 × $12.10 -
Screw Rivet Retainer - for BMW, Land Rover
1 × $2.20 -
BALLJOINT, FR UPPER - DISCOVERY 3, 4 & RANGE ROVER SPORT
2 × $24.26 -
DOOR LOCK, LH (with key lock)
1 × $71.23 -
Exhaust Manifold Gasket
1 × $14.85 -
Battery Lead End Insulator
1 × $3.03
MGB and MGB GT
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
$16.78
Adaptor Fuel Bowl To Carby  L/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about 1 o’clock position.
-
$16.78
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about ’11 o’clock position.
-
-
$7.70
Alternator Adjusting Link,
This is a Second Hand Part
-
-
Availability: This product is currently out of stock.
Alternator Mounting Bracket Rear Pre A Plus Engines
Can be used on any alternator, However For originality on
Mini Cooper S Mk2 Clubman Gt & Mini K use AYA9189-S
which incorporates coil mounting provision this is a 2/Hand Part
For A Plus engines use CAM4853-S
-
$128.15
ANGLE DRIVE ADAPTER – SPEEDO CABLE
-
$6.60
Battery Cable Earth, Battery to Body with Screw in fitting.
Suits Mini 1985 – 2001, MGB
New Old Stock
-
$3.03
Battery Lead End Insulator (Rubber Boot)
Fitted to the end of the battery leads where they attach to the solenoid.
-
-
$2.53
LH & RH Front
Bleed nipple for front wheel cylinders on twin leading shoe type set ups, this is where you have 2 cylinders per hub
Will also fit front calipers on disc assemblies
-
-
$77.28
Body Moulding Fixings Kit
Items in this package:
6 Stud Plate – AHH6360
42 Round Tuckers moulding clip for 11.3mm moulding gap and 3.2mm panel hole.
6 Nut – No 10 – 3/16 inch UNF x 3/8 inch – HN2005
6 Washer – Single Coil Locking – ID 5mm – WL105001 -
$242.00
Boss Kit, Suit Moto-Lita Steering Wheel