-
Thermostat Housing Spacer
2 × $19.80 -
Carburettor Jet Bearing Kit, 1-1/2'' SU
1 × $27.48 -
Carburettor Dashpot Spring, Red Band
1 × $21.51 -
Mirror Glass, LH Convex
1 × $59.68 -
Wiper Switch, Single Speed
1 × $33.00 -
Alternator 17ACR, 45 Amp with Internal Regulator
1 × $181.50 -
GASKET, INTERCOOLER TO INLET MANIFOLD, 5.0L V8
1 × $111.22 -
Brake Disc, Vented Mini Metro Turbo
1 × $68.75 -
HOSE, RESERVOIR to POWER STEERING PUMP - L322 AJV8
2 × $33.83 -
CHAIN - TIMING - PRIMARY
2 × $107.42 -
Headlamp, 7" Sealed Beam
2 × $16.50 -
Filter Oil, Element - AJ 2.0L
2 × $11.94 -
BOLT (M16x200mm), DAMPER MOUNT to FRONT LOWER ARM - DISCOVERY & RANGE ROVER SPORT
2 × $11.00 -
Alternator Belt
1 × $17.91 -
Fuel Tank Mounting Bracket, Right Hand Tank
1 × $77.00 -
Braided brake hose 4 Piece kit
1 × $220.00 -
Bleed Screw, Wheel Cylinders
1 × $2.53
MGB and MGB GT
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
$16.78
Adaptor Fuel Bowl To Carby  L/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about 1 o’clock position.
-
$16.78
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about ’11 o’clock position.
-
-
$7.70
Alternator Adjusting Link,
This is a Second Hand Part
-
-
Availability: This product is currently out of stock.
Alternator Mounting Bracket Rear Pre A Plus Engines
Can be used on any alternator, However For originality on
Mini Cooper S Mk2 Clubman Gt & Mini K use AYA9189-S
which incorporates coil mounting provision this is a 2/Hand Part
For A Plus engines use CAM4853-S
-
$128.15
ANGLE DRIVE ADAPTER – SPEEDO CABLE
-
$6.60
Battery Cable Earth, Battery to Body with Screw in fitting.
Suits Mini 1985 – 2001, MGB
New Old Stock
-
$3.03
Battery Lead End Insulator (Rubber Boot)
Fitted to the end of the battery leads where they attach to the solenoid.
-
-
$2.53
LH & RH Front
Bleed nipple for front wheel cylinders on twin leading shoe type set ups, this is where you have 2 cylinders per hub
Will also fit front calipers on disc assemblies
-
-
$77.28
Body Moulding Fixings Kit
Items in this package:
6 Stud Plate – AHH6360
42 Round Tuckers moulding clip for 11.3mm moulding gap and 3.2mm panel hole.
6 Nut – No 10 – 3/16 inch UNF x 3/8 inch – HN2005
6 Washer – Single Coil Locking – ID 5mm – WL105001 -
$242.00
Boss Kit, Suit Moto-Lita Steering Wheel