-
Brake Drum Screw, Short
1 × $0.88 -
Bearing, Layshaft, Small Roller Type
1 × $8.53 -
Colour Tune, Single Plug Kit, 14mm
2 × $126.50 -
FILTER OIL, ENGINE - D3/D4/XF/XJ/X-TYPE/S-TYPE (MAHLE)
2 × $16.50 -
Ratchet Flare Nut Wrench 19mm
1 × $39.60 -
Side Panel Rear Quarter Right Hand, UK Mini
1 × $544.50 -
Exhaust Clamp Pipe to Manifold Suit Mini With Standard Exhaust System
2 × $8.80 -
Thermostat Housing Stud 48mm (1.9375") Long
2 × $2.82 -
Cylinder Head Stud, Long 14cm Genuine New Old Stock
2 × $9.55 -
2500 Electric Winch - Synthetic Rope
2 × $374.00 -
Water Pump
1 × $95.48 -
Heater Tap
1 × $44.00 -
Adaptor Fuel Bowl To Carby L/Hand 30 Degree
1 × $16.78 -
Ball Joint Kit, Genuine Rover Brand
1 × $94.12 -
Chrome Window Winder Handle
1 × $29.65 -
Control Arm, Upper R/H, Dry Sus Mini NOS
1 × $88.00 -
BRAKE FLUID TESTER
1 × $55.00 -
Carburettor Jet Bearing Kit, 1-1/2'' SU
2 × $27.48 -
SHOCK ABSORBER - REAR - BIG BORE EXPEDITION +2in
1 × $192.50 -
DISC, BRAKE FRONT - D3/D4/RRS (GEO MET)
1 × $106.70 -
Glovebox Insert, MGB 1962 to 1980
1 × $82.50
Engine
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
-
$7.70
Alternator Adjusting Link,
This is a Second Hand Part
-
-
Availability: This product is currently out of stock.
Alternator Mounting Bracket Rear Pre A Plus Engines
Can be used on any alternator, However For originality on
Mini Cooper S Mk2 Clubman Gt & Mini K use AYA9189-S
which incorporates coil mounting provision this is a 2/Hand Part
For A Plus engines use CAM4853-S
-
$1.76
Stock brass manifold nut. You will probably want a mix of these and the longer # 51K1177 to secure your intake/exhaust manifold.
Sold separately (you will need to buy 6 of these for a complete set)
-
-
$15.40
Camshaft Follower Tappet, With Oil drain Hole
Suit all engine sizes, 44 grams each.
Sold Individually
-
-
$3.50
Choke Cable Barrel Screw, Cable to Carby
The screw that locks the cable on the ADU9102 genuine heater valve bolted to the cylinder head.
This is the choke screw that holds the inner choke cable to the choke mechanism, fits ALL SU carbies either twin or single
-
$39.39
Clutch Master Cylinder Repair Kit, 0.75″
Suit Tin & Australian Made Plastic tank type
For pre 1985 models which had one cap type seal and one ring type seal.
-
-
$7.70
Connecting Rod Bolt Suit 1275 Engines with Large Con Rod Journal
11/32″ Diameter
-
-
$1.54
Copper Washer, Oil Pressure Relief Valve
The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16″ domed cap nut beside the dizzy. Once this nut is removed to prevent oil leaks, it is always a good idea to replace the copper washer (6K431) under the domed nut.