-
Manifold Stud
2 × $1.54 -
THERMOSTAT - HOUSING
1 × $121.66 -
Carburettor Kit Suit HS6 1-3/4"
2 × $63.25 -
Rocker Arm Bush
4 × $7.15 -
Wiper Blade Assembly, 10'', Mini / MGB / Triumph / Land Rover
1 × $26.68 -
Trakrite Wheel Alignment Gauge
1 × $214.50 -
BEARING - DOUBLE ROW - SUIT MOST MINI GEARBOX'S
2 × $101.95 -
CLIP-WASHER JET - HEADLAMP
2 × $4.40 -
Cylinder Head Stud, Short
1 × $13.00 -
Apron Panel, no mounts, Mini Aftermarket
1 × $342.65 -
Valve Guide
3 × $7.70 -
Heater Tap & Blanking Plate Gasket
2 × $0.66 -
Bolt, Remote Control to Diff Housing
1 × $1.10 -
Steering Rack Wave Washer
1 × $1.65 -
TURBOCHARGER - 300TDi (Complete Unit)
1 × $1,314.50 -
FRONT ABS SENSOR - JAGUAR XE & X260 XF
1 × $28.33 -
Apron Panel Adaptor R/H, later grille panel to early type
1 × $64.46 -
BUSH, REAR UPPER CONTROL ARM - L322 RANGE ROVER
1 × $15.99 -
Master Cylinder Tank, Plastic
1 × $44.00 -
Colour Tune, Single Plug Kit, 14mm
2 × $126.50 -
DOOR LOCK, LH (with key lock)
2 × $71.23 -
Viscous Fan Spanner 32/36mm
1 × $49.50 -
12v/ 240v PORTABLE 45L FRIDGE FREEZER
4 × $1,228.15 -
BEARING, REAR WHEEL - RANGE ROVER EVOQUE & JAGUAR MODELS
2 × $42.97 -
By-pass Hose Adaptor, Long
2 × $22.00 -
ELEMENT- OIL COOLER - RR/RRS
2 × $15.95 -
LINK - FRONT SWAY BAR RH & LH
2 × $24.50 -
TRACK RODS, HEAVY DUTY (Includes ANR2860) (BRITPART)
1 × $270.33 -
TUBE, FUEL RETURN / LEAK OFF 2.2L DIESEL
2 × $137.50 -
ELECTRONIC IGNITION KIT - 6CYL DISTRIBUTOR TYPE
2 × $99.00 -
Setscrew, Multi use
5 × $1.05 -
INTERCOOLER SILICONE HOSE KIT BLACK 300Tdi and 200Tdi
2 × $132.00 -
Brake Pipe Bender
1 × $45.93 -
SHIM, SWIVEL HOUSING - 0.130mm/0.005"
2 × $1.10 -
Side Panel Rear Quarter Right Hand, UK Mini
1 × $544.50 -
Alternator Belt
1 × $17.91 -
Valve Cotter, Pair
2 × $9.90 -
Heater Tap
2 × $44.00 -
SENSOR - MASS AIR FLOW
2 × $298.38 -
Radiator Cap, 7lb Long Reach Type
2 × $8.80 -
FUEL CAP, DIESEL TANK
2 × $38.19
Transmission and Driveline
-
Availability: This product is currently out of stock.
Hub & stud assembly suitable for both front & rear hubs
Suits Defender, Discovery 1 & Range Rover Classic 1986 – 1994
-
Availability: This product is currently out of stock.
FRONT HUB & STUD ASSEMBLY – DEFENDER
-
Availability: This product is currently out of stock.
Lock nut for axle hub. Qty 1 required per side
Suits Defender front axles from LA930456 & rear hubs from XA159807
-
-
Availability: This product is currently out of stock.
Early oil type axle seal with double lips & springs. 12mm
Used on front and rear axles.
Suits Land Rover Series 3, Defender, Perentie, Discovery & Range Rover Classic
-
Availability: This product is currently out of stock.
Spacer for the front and rear wheel hub bearings on Defender up to 2016.
15.0 mm, Colour code Black
-
Availability: This product is currently out of stock.
Spacer for the front and rear wheel hub bearings on Defender up to 2016.
15.1 mm, Colour code Green
-
Availability: This product is currently out of stock.
Spacer for the front and rear wheel hub bearings on Defender up to 2016.
15.2 mm, Colour code Blue
-
Availability: This product is currently out of stock.
Spacer for the front and rear wheel hub bearings on Defender up to 2016.
15.3 mm, Colour code Red
-
Availability: This product is currently out of stock.
Axle drive flange, 24 spline. Suitable for both front & rear hubs.
Suits Defender, Discovery 1 & Range Rover Classic
-
Availability: This product is currently out of stock.
Round flange kit, 24 spline for front and rear diifs.
Suits Defender up to LA with Land Rover type axle, Discovery 1 & 2, Range Rover Classic 1992 – 1994
-
Availability: This product is currently out of stock.
Diff flange & seal kit for front & rear pinions.
Suit Defender & P38
-
-
Availability: This product is currently out of stock.
Layshaft Bearing, LT77 5 Speed gearbox
-
Availability: This product is currently out of stock.
Locking alloy wheel nuts, set of 5 with key
Suits Defender, Discovery 1 & Range Rover Classic 1992 – 1994