You have no item(s) in your cart
Oil Pressure Relief Valve Spring, Standard
SKU: 6K853Available
$6.60
Oil Pressure Relief Valve Spring, Standard
The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16″ domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will probably be stuck, requiring encouragement to come out. Briefly cranking the engine over will usually free the plunger; in severe cases a thread tap can be screwed in to grip the plunger from the inside to draw it out. This spring (6K853) and ball assembly should give you a steady 75 PSI @ high RPM. To prevent oil leaks, it is always a good idea to replace the copper washer (6K431) under the domed nut.
3 in stock
Description
Mini & Moke
MGA
MGB
Additional information
Weight | 0.01 kg |
---|---|
Dimensions | 5 × 1 × 1 cm |
Related Products
$4.24
Blanking Plug, for the Cylinder Head and Manifold
$16.50
Temperature Transmitter Mini & Moke MGB, MGC Triumph TR4, TR4A
$544.50
Side Panel Rear Quarter Right Hand Side, UK Mini
$7.15
Rocker Arm Bush (8 Required) Mini & Moke Not fitted to CAM289 (Sintered Rocker Arm)
$19.80
This is the spacer that sits between the engine support bracket and the thermostat housing...
$9.90
Competition Grade head (spring) washers, set of 10. Original ST spring type washer especially required...